Fundamental Features of UPS(Uninterrupted power supply)

MAR 15, 2023

BY Admin

Fundamental Features of UPS

UPS is a non-repository power supply than UPS, firmly holds the first share of the market, which Schneider UPS launched, which users can see through An intuitive display of UPS operating conditions, UPS Power Supply Navigation keys to be used to help users set and control UPS key mechanisms quickly, effectively support the operation of the critical business system, and configure the battery pack.

The UPS (Uninterrupted power supply)power supply is a type of stored energy, and the inverter is the main component of constant voltage frequency. UPS Non-Peripheral Power Supply It is mainly used to provide an uninterrupted power supply for one computer, computer network system or other electronic power equipment.

Non-replacement power supplies nine basic functions:

1. Voltage stability

The standard of theUPS power transmission line that may be affected by a voltage net, for example, the user voltage adjacent to the substation is higher than 130 ~ 120v, the user substation is lower than the substation about 100 ~ 90v, such as voltage too high or too low, the user’s equipment will shrink life, UPS Power Supply will be serious on equipment, Use of online centers to provide stable voltage supply, fluctuations UPS Power Supply voltage Non-consumable of less than 2V, equipment and protective equipment can be expanded.

2. Power supply protection

Instantaneous mainstream if it is equipped with UPS, then immediately from the power re-installable power to convert DC battery to AC power to continue power loading.

3. High voltage and low protection

The built-in UPS voltage controller (AVR) will make appropriate adjustments to maintain the mainstream voltage in the area available, UPS Non-Peripheral Power Supply if the voltage is too low or too high to use, UPS DC battery power AC power to continue to power the user’s equipment.

4. Frequency stability

The main frequency of two Hz types is divided, the frequency of each second cycle is often changed, 50Hz is 50 weeks per second, 60Hz is the leading cause of Taiwan, and 50Hz is the mainland. When the generator is operated by a sudden change in the power consumption of the client, UPS Powerless Power Supply, the rotating speed will change the power flow of reinstated power, and the uninterrupted power conversion may provide the stable frequency.

5. Processing

As a result of power transmission and distribution lines to the client, to utilize a variety of machine equipment, which often causes a voltage waveform to be distorted. Since the waveform distortion becomes concrete to disrupt the equipment, it will make the transformation temperature rise to the power system, the maximum 5% distortion rate, and the general UPS design distortion rate <3% ~ = “”>

6. Monitoring power supply with intelligent UPS

Intelligent Communications and monitoring software can record frequency and frequency voltage times to access the power supply monitoring, UPS Powerless Power Supply and save the schedule saving power supply switch machine.

7. To deter the noise of common methods of UPS

The total noise generated between the FireWire / neutral line and the ground.

8. The noise to push transformational methods of UPS

The noise of transit mode between the FireWire and the neutral line is generated.

9. Waves protection

General power re-installations will be equipped with an absorption or wave discharge designed to absorb a sudden wave to protect the equipment of the user.

Write a Comment

Your email address will not be published. Required fields are marked *